Beer Yeast Barm Disc Separator Centrifuge

• Type: Extraction Equipment
• Separation Mode: Sedimentation Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Condition: New
• Model NO.: JMLDP450
• Warranty: 1year
• Certification: ISO/Eac
• Application: Bacteria and Other Liquid Solid Separation
• Operation: Automatical Continuous
• Impurity: Less Than 2ppm
• Control Box: Can Be Customize
• Raw Material: 304/316L Food Grade
• Transport Package: Wooden Case
• Trademark: FIVEMEN
• Origin: Jiangsu, China
• HS Code: 8421192000
• Production Capacity: 50-200L/H

Product Description

Product description

JMLDP450 disc type separator is yeast nozzle slag type. It is widely used in the suspension of solid concentration and the light phase concentrated emulsion. Such as the separation and concentration of various yeast, clay and pigment water clarification, catalyst recovery and high polymer powder. So it is one of the ideal equipment for the yeast plant, alcohol factory, brewing plant and environmental protection department.

Techinical paramete

Model		JMLDP450	JMLDP330
Drum diameter	mm	450	330
Drum rotating speed	r/min	6000	6500
Settlement area	CM^2	66*10^7	40*10^7
Separation factor		8540	8650
Nozzle quantity	piece	12 adjustment	4
Nozzle diameter	mm	φ1.1,φ1.2,φ1.3	φ0.9,φ1.0,φ1.1
Impurity after clarification	≤4mg/kg,the diameter of particle less than 2μmm
Rated capacity	kg/h	8000~15000	3000~5000
Motor power	kW	11	5.5
Weight	Kg	1100	580
Dimension	L*W*H	1100*700*1600	1000*850*1200

working principle
Yeast disc separator is a type of nozzle slag discharge separator. It is widely used in suspension's solid phase concentration and emulsion's light phase concentration. For example, kinds of yeast's separation and concentration, clarification of clay and pigment's dirty water, recycle of catalyst and high polymer powder. So it is one of the best equipment for yeast factories, alcohol factories, brewery factories and environmental protection departments.

Main parts

Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor

(1).Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.

(2)The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 316L

(3)The Stainless steel cover use SUS304

(4)The base use casting steel, coating does the same way as ship bottom.


Application occasion


Company information