Automatic Horizontal Marine Oil and Fuel Oil Decanter Centrifuge Separator

• Type: Centrifuge
• Object: Decanter Centrifuge
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Horizontal
• Centrifuge Type: Horizontal Spiral Centrifuge
• Model NO.: LWS580
• Distillation Equipment Type: Separation Equipment
• Extraction Tower Type: Separation Equipment
• Pressure: Low Pressure
• Condition: New
• Machine Time: Horizontal Decanter Centrifuge
• Warranty: 1 Year
• Control Type: PLC Control Box
• Operation: Automatical Continuous Operation
• Liquid Discharge: by Gravity and Centripetal Pump
• Function: Liqud Liquid Solid or Liquid Solid
• Certification: Ce/ISO/Eac
• Bearing: SKF Bearing
• Material: 304/316L/2205 Ect
• Motors: Double
• Keywords: Olive Oil Centrifuge
• Application: Avocado Oil, Olive Oil
• Transport Package: Wooden Box
• Specification: depend on model
• Trademark: Fivemen
• Origin: China
• HS Code: 8421192000
• Production Capacity: 1t/H-100t/H

Product Description

Description :

Instruction                                                                                                                                        

Horizontal spiral centrifuge is one of our company main products. According to the requirement of the material used, we design the horizontal spiral centrifuge with one motor, two motors driving. At the same time, we design two motors separately on both sides of the machine and motors on the same place of the machine. We also develop three column horizontal spiral centrifuge, used in the separation of coal tar oil, water, slag in the industry, in petrochemical in the separation of oil, water, slag.

Main motor drive at full speed rotating drum, material put into spiral continuously by feed tube, evenly distributed to the spiral discharging port. Under centrifugal force, solid content settles to the drum wall and is pushed out cone drum slag notch by the spiral pusher. Liquid is overflow along the spiral to the drum big end. It form big end set out liquid and small end set out solid.


 

Feature

The decanter centrifuge can be adjusted to suit individual requirements by varying: 

1. Bowl speed to ensure the exact relative centrifugal force required for optimized separation. 

2. Differential speed, for optimized balance between liquid clarity and solids discharge capacity. 

3. Pond depth in the bowl for optimized balance between liquid clarity and solid dryness. 

Reference standard  

1.  Main standard of the national machinery industry. 

JB/T502-2004 "spiral discharge sedimentation centrifuge"

JB/T9095-1995 "centrifuge, separator forgings, welding conventional NDT technology standard"  The national main standard

2. GB10894-89 "separation machinery noise sound power level measurement engineering method"

Application:

1. Any suspension with 3 phase,light liquid,heavy liquid and solid,i.e.Fat ,water,sludge separation.

 

2. Chemical or pharmaceutical products such as: butane dicarboxylic acid, alum, aluminum hydroxide, ammonium hydrogen carbonate, ammonium nitrate, ammonium sulphate, anthracene, antibiotics, barium chloride, barium carbonate, barium sulphate, benzene, blood products, blue vitriol, borax, boric acid, calcium carbonate, calcium citrate, calcium hydroxide, calcium nitrate, calcium oxalate, casein, cellulose, chrome yellow, clay, methyl cellulose, corundum, corn plum mule, cooking oil, processed fish, mirabilite, glutamate, hops, pesticide diatomaceous earth, herbicides, tartaric acid, sodium sulphate, sodium phosphate, sodium nitrate, carbon black and others materials.

 

 3.Mineral oil, waste oil, bilge sludge, lubricating oil,crude oil,Olive oil, palm oil, avocado oil;

 

 4. recovering of animal and vegetal basic products (oils/fats, starch, proteins).

 

 5. Beverages (wine, beer, fruit)



Technical parameters

2 phase Decanter Centrifuge:



After entering into the high-speed turning drum, the solid-phase particles in the mixed liquid run and settle on the drum wallunder the action of greatest centrifugal force; the light liquid settles at the innermost place of the drum under minimum centrifugal force; same as the drum's turning direction, a screw feeder also turns at a high speed, and a constant speed difference is generated by the differential mechanism, then the liquid will be discharged by the liquid outlet.

3 phase Decanter Centrifuge:


 

Principle of threephase decanter centrifuges is as shown in the above figure. The substance to be separated is fed by the feeding tube into the accelerating cavity of  the spiral conveyor, then enters high speed running drum wall. As the light liquid, heavy liquid and insoluble solid contained in the substance have different specific 
gravities,  the three materials are subject to varied centrifugal forces: the insoluble solid settles into the inner wall (outside) due to its highest specific gravity and subject to maximum centrifugal force; the light liquid settles maximum far away from the inner wall (outside) due to its lowest specific gravity and subject to minimum centrifugal force; and heavy liquid settles in the middle place. The insoluble solid is discharged from the solid discharge port by a spiral feeder which has relative differential speed with the drum; and the light and heavy liquids are then separated by different structures inside the machine wherein the heavy liquid is discharged by the centripetal pump, and the light liquid is discharged via the force of gravity, thus the purpose of three phase separation is achieved. 

2 phase oil Decanter Centrifuge:
 

Type	Bowl diameter(mm)	Bowl length/ Bowl diameter	Bowl speed (r/min)	Main Power(Kw)
LW180	180	2.5-720	6000	3-5.5
LW260	260	3.0-4	5000	7.5-11
LW355	355	2-4.5	4000	11-30
LW420	420	3-4.1	3600	18.5-37
LW450	450	2-4.4	3600	18.5-37
LW480	480	2-4.2	3200	18.5-45
LW500	500	2-4.2	3200	18.5-55
LW530	530	2-4	3200	22-55
LW580	580	2-4	2800	30-55
LW620	620	2-4	2800	37-110
LW760	760	2-3.5	2500	55-132
Note: In case of differences between the table and the user manual, the latter shall prevail.

3 phase oil Decanter Centrifuge:
 

Type	Bowl diameter(mm)	Bowl length/ Bowl diameter	Bowl speed (r/min)	Main Power(KW)
LWS355	355	3.3-4.5	4000	15-18.5
LWS420	420	4.1	3600	22
LWS500	500	4.2	3000	30
LWS530	500	4.2	3000	30
LWS580	580	4.1	2800	45
LWS620	620	4	2800	45
Note: In case of differences between the table and the user manual, the latter shall prevail.

Main Parts


Packages





Company information

Nanjing FiveMen Machine CO., LTD is professionally engaged in design, manufacture, sale and installation of kinds of separators. We are one of the leaders of disc centrifuge, decanters, tubular centrifuge, separation system and marine equipment in china. Which is located in Nanjing city of Jiangsu province,  the well-known ancient capital with beautiful sceneries in the Yangtze River Delta.
Over the years, our products have been successfully applied in liquid-solid or liquid-liquid-solid separation of biomedicine, traditional Chinese medicine, phytoextraction , health foods, beverages, dairy products, lanolin, animal and plant oil, mineral oil, petroleum, chemical industry, environmental protection and other industries. For some materials with small difference in specific gravity of liquid and solid phase ,small solid particle size and low content by use of centrifuge extraction, concentration and clarification , our company can provide you with ideal separation equipment.
We adhere to the management principles of "quality first, Technology first, integrity management, Customer satisfaction " since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force. 






Our service:
 

Pre-Service    

1. 24 hours onlinne consult and service

2. Introduce the details of products to the customers, answer the question raised by customer at firstly;

3. Providing the operation , installation and working video for customers.

4. Providing the different solutions for choice according to the needs and requirements of customers;

Sale Service

1. Ensure new product with high quality before delivery;

2. Packing according to the export requirements and shiping carefully;

3. Provide full set of documents as customer's requirements.

4. Providing one year sparing parts for you for free.

5. Delivery on time
After-sale Service

1. Help to install and debug the equipment, Our technicians could be dispatched for

overseas service.

2. Provide 24 hours techincal support by e-mail or phone;

3. Abundant spare parts in stock are available to provide.

4. Help customers slove any other questions about products or other aspect;

5. Your workers could get trained both in our factory and yours.

Service Commitment

1. We will provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

2. Consultant services for whole machine life, 24 hours technical support by email and telephone.

3. Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.