High Speed Disc Stack Centrifugal Nutural Rubber Latex Separation

• Type: Centrifuge
• Separation Mode: Sedimentation Type
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: Disc Centrifuge
• Pressure: Low Pressure
• Model NO.: RPDH270
• Condition: New
• Impurity: Less Than 1ppm
• Application: Industrail/Chemical/Food/Pharmac
• Separation Phase: Two/Three Phase
• After-Sales Service Provied: Engineers Available to Service Machinery Overseas
• Bearing: SKF
• Certification: ISO/Eac
• Control Type: PLC Control Box
• Transport Package: Wooden Case
• Specification: depend on model
• Trademark: FIVEMEN
• Origin: Jiangsu, China
• HS Code: 8421192000
• Production Capacity: 50-100L/H

Product Description

Production

The natural latex is from rubber tree, milk white, solid content is 30%~40%, and the average diameter of solid is 1.06um. The fresh natural latex contain latex 27%~41.3%(m/m), water 44%~70%, protein 0.2-4.5%, natural resin 2%~5% ,saccharides 0.36%~4.2% and ash 0.4% . To facilitate transportation and processing, natural rubber latex should be concentrated to the solid content of 60% by adopting the method of centrifugal centrifugal or evaporation. So it also known as concentrated latex.

 

Latex series disc separator is good equipment for producing latex. It is mainly used for natural rubber slurry concentration and clarification, makes rubber slurry separate concentrated latex and clear skim latex, and eliminates the solid impurity of whey liquid. Separator's design, manufacture and checking and acceptance comply with national standard GB10897 and GB10898.

Features                                                                                         

1.Machine starts the friction to start off, about six to ten minutes. the machine runs smoothly, low noise 

and vibration, the installation path is very easy to operate.

 

2.The bearings use imported FAG, transducer using Japan brand " Fuji", the main strengthen parts of Roller body and Roller cover use 2Cr13,and the other parts of contacted materials such as Disc all use 304L.

 

3.The Stainless steel cover use SUS304

 

4.The base use casting steel, coating does the same way as ship bottom.

Moled and Parameters:  

Model	JRLDR395
Drum diameter       mm	395
Capacity            L/h	400-650
Drum rotating speed   rpm	7069
Separation factor	11032
Motor power         KW	11
Work state	Open type
Dimension           mm	1340*740*1670
Weight              kg	≈900

 

 

equipment design, manufacture, testing, reference standard

    

  National machinery industry the main standard

 

  1. JB/T8103-1999 <The condition of disc separator technology>

 

  2. JB/T9095-1995  <centrifuge,Separator forgings,Normal nondestructive flaw detection technology of welding specification>

 

The main standards of the state

 

1.GB10894-89  <The separation of mechanical engineering method for determination of the power levels of noise>

Application Occasion

Detailed images


Packing


Company information

 
 

If you need further information, please contact us freely, we will do our best to cooperate with you.